LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Tracker Base, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Vacuum Modulator Inspection

Vacuum Modulator Inspection

  1. Raise and support vehicle. Remove vacuum hose from modulator. Remove modulator from transmission using Modulator Wrench (J-23100).
  2. Inspect modulator for fluid leakage. Replace vacuum modulator if any transmission fluid drains from modulator. With diaphragm rod in place, test for vacuum leakage by attaching vacuum pump to fitting on vacuum modulator. Apply 20 in. Hg of vacuum to modulator. If vacuum gauge on pump indicates a vacuum loss, replace vacuum modulator. Inspect vacuum modulator "O" ring for cuts and other damage. To install components, reverse removal procedure.
scientia non olet · About LEMON Manuals