LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Tracker Base, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Gearshift Cable

Gearshift Cable

  1. Remove center console covers. Place gearshift in Neutral. Loosen adjusting nut and lock nut. See Fig 1 .
  2. Ensure shift lever on transmission is in Neutral position. Pull shift control cable tight.
  3. Tighten adjusting nut and then lock nut. Ensure gearshift operates properly in all gear ranges. Install console covers.
Fig 1: Adjusting Gearshift Cable
G90B00753Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals