LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Tracker Base, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Rear Wheel >> Diagnosis >> Code 10, Stoplight Switch On Constantly

Code 10, Stoplight Switch On Constantly

  1. Turn ignition off. Disconnect EBCM harness connector from EBCM. Turn ignition on. Measure voltage between EBCM harness connector terminal No. 8 (Green/White wire) and ground.
  2. If reading is less than 10 volts, replace EBCM. See RWAL ELECTRONIC CONTROL MODULE  under REMOVAL & INSTALLATION. If reading is 10-15 volts, replace or adjust stoplight switch or repair short to voltage in Green/White wire.
scientia non olet · About LEMON Manuals