LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Storm Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Servicing - A/T) >> Lubrication >> Draining & Refilling

Draining & Refilling

WARNING: This page is about a different car, the 1989 Isuzu I-Mark, 1988 Isuzu I-Mark, and 1987 Isuzu I-Mark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove drain plug and drain fluid. Remove oil pan. Remove oil screen. Clean oil pan, magnet, and oil screen in clean solvent and dry.
  2. Install oil screen. Tighten retaining bolts to 86 INCH lbs. (9.7 N.m).
  3. Set magnet on oil pan so that it rests directly below oil screen. Install oil pan. Tighten bolts to specification. Install filler tube clip bolt (if equipped) and tighten to 29 ft. lbs. (39 N.m).
  4. Install drain plug using a new gasket. Tighten to 11-14 ft. lbs. (15-19 N.m). Add about 2.1 qts. (2.0L) of ATF. Check fluid level. Add ATF as necessary to bring fluid to proper level.
scientia non olet · About LEMON Manuals