LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Prizm Base, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Rail & Injectors (PFI) >> Installation

Fuel Rail & Injectors (PFI): Installation

  1. Install NEW "O" ring and grommet on injectors. Lubricate new injector "O" rings with clean gasoline. Install insulators into injector bores. Install spacers at delivery pipe-to-cylinder head bolt locations.
  2. Install fuel rail and tighten to specification. See TORQUE SPECIFICATIONS  . Ensure injectors rotate smoothly in injector bore. If injectors are tight and will not rotate, loosen and reinstall injectors. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals