LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Prizm Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body (PFI) >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Remove air cleaner assembly and air intake duct. Disconnect and label all vacuum hoses, wire connectors and cable linkages from throttle body.
  2. Remove bolts retaining throttle body to intake chamber. Remove throttle body, and discard gasket. Clean gasket mating surfaces. DO NOT  scratch mated sealing surfaces when removing old gasket material.
  3. To install, reverse removal procedure. Use NEW gasket. DO NOT  use sealer on gasket. Tighten 4 throttle body-to-intake chamber bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals