LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1993 >> Metro Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Manual >> Adjustments >> Rack Guide Preload

Rack Guide Preload

  1. Back off rack adjusting screw. See Figure . Tighten rack adjusting screw until it is snug. Using an INCH-lb. torque wrench and Socket (J-34871), measure rotational torque of pinion gear.
  2. Torque reading should be 10.6 INCH lbs. (1.2 N.m). Back off adjusting screw (up to 90 degrees) until specified torque is achieved. Ensure rack moves smoothly. Install cap on adjusting screw.
scientia non olet · About LEMON Manuals