Blower Motor Switch Test
- Measure continuity between terminal on blower motor switch connector and corresponding terminal on blower resistor connector. If continuity does not exist, repair open wire. If continuity exists, go to next step.
- Check continuity on blower motor switch. See BLOWER MOTOR SWITCH CONTINUITY table. If continuity does not exist, replace blower motor switch.
BLOWER MOTOR SWITCH CONTINUITY
| Blower Switch Position | Continuity Between Terminals | |
|---|---|---|
| Metro | ||
| Low | Light Green & Pink/Black | |
| Medium-Low | Light Green, Pink/Black & Pink/Blue | |
| Medium-High | Light Green, Pink/Black & Pink/Green | |
| High | Light Green, Pink/Black & Pink | |
| Prizm | ||
| Low | White/Black & Blue/White | |
| Medium-Low | White/Black, Blue/White & Red | |
| Medium-High | White/Black, Blue/White & Blue/Black | |
| High | White/Black, Blue/White & Black/White | |
| Tracker | ||
| Low | Yellow/Blue & Pink/Black | |
| Medium-Low | Yellow/Blue, Pink/Black & Pink/Blue | |
| Medium-High | Yellow/Blue, Pink/Black & Pink/Green | |
| High | Yellow/Blue, Pink/Black & Pink | |