LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Prizm Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - A-130 Series >> On-Vehicle Service >> Control Valve Assembly >> Removal

Control Valve Assembly: Removal

  1. Raise and support vehicle. Clean exterior of transaxle oil pan. Drain transaxle fluid. Remove oil pan and gasket. Remove strainer and oil tube bracket. Note location of oil tubes. Using large screwdriver, remove oil tubes.
  2. Remove detent spring. Remove manual valve and manual valve body. See Figure. Note bolt length and location. Remove control valve assembly bolts. See Figure. Remove throttle cable. Remove control valve assembly. Remove governor oil strainer. Remove governor apply gasket. See Figure.
scientia non olet · About LEMON Manuals