LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1992 >> Metro Base, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starter - Direct Drive >> On-Vehicle Testing >> Clutch Start Switch

Clutch Start Switch

  1. Clutch start switch, mounted to bracket above clutch pedal, completes start circuit when pedal is fully pressed. Switch is wired in series between ignition switch and starter solenoid.
  2. Disconnect switch harness connector. Using ohmmeter, ensure continuity exists between switch connector terminals when clutch pedal is fully pressed. If continuity does not exist, adjust or replace switch.
  3. Turn ignition switch to START position and fully press clutch pedal. Using test light, ensure switch has voltage on both connector terminals. Repair or replace if necessary.
scientia non olet · About LEMON Manuals