LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Tracker Base, RWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Adjustments >> Toe-In Adjustment (Rear) >> Metro

Toe-In Adjustment (Rear): Metro

  1. Adjust rear wheel toe-in by rotating control rod inside bolt. See Fig 1. Loosen right and left control rod inside nuts. Turn right and left control rod inside bolts same amount to align toe-in to specification. See ALIGNMENT SPECIFICATIONS .
  2. After adjustment, tighten right and left control rod inside nuts to specification while holding control rod inside bolts. See TORQUE SPECIFICATIONS .
Fig 1: Adjusting Rear Toe-In (Metro)
G90G00709Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals