LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1991 >> Storm Base, 2D Hatchback, Standard >> Repair and Diagnosis >> Electrical >> Starter - Reduction Gear >> On-Vehicle Testing >> Cranking Test

Cranking Test

  1. Connect voltmeter and ammeter to battery. See Fig 1. Disconnect ignition coil secondary wire from distributor cap, and attach it to ground. Crank engine, and observe meters.
  2. Ensure cranking voltage is at least 9.5 volts. Ensure current draw is not more than 270 amps. If readings are not as specified, replace starter.
Fig 1: Typical Starter Cranking Test
G29599Courtesy of AMERICAN HONDA CO., INC.