Idle-Up Vacuum Switching Valve (IVSV)
NOTE:
The idle-up vacuum switching valve also may be referred to as the Idle Speed Control (ISC) solenoid.
- The IVSV is located on end of intake manifold on Prizm or below mass airflow sensor on Prizm GSi. The IVSV by-passes air into intake manifold on Prizm or around throttle valve of mass airflow sensor on Prizm GSi when it is activated by ECM.
- The IVSV is energized whenever idle speed drops to less than desired RPM due to engine load (i.e. electrical, P/S, A/T in Drive, etc.). No other information is available from manufacturer.