LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Tracker Base, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Testing >> Blower Resistor Test >> Metro

Blower Resistor Test: Metro

Using an ohmmeter, check resistance at resistor terminals. See BLOWER RESISTOR SPECIFICATIONS  . If any reading is not within specification, replace blower resistor. See Figure .

BLOWER RESISTOR SPECIFICATIONS

Between Terminals Ohms
H & L 2.2-2.8
H & M1 1.0-1.8
H & M2 0.2-0.8
scientia non olet · About LEMON Manuals