LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Tracker Base, Automatic >> Repair and Diagnosis >> Electrical >> Starter - Reduction Gear >> Testing (On-Vehicle) >> Ignition Switch Test >> Tracker

Ignition Switch Test: Tracker

  1. Using test light, backprobe White/Green wire terminal of ignition switch 7-terminal connector. Connector is located behind lower instrument panel, near steering column. Test light should glow.
  2. If test light does not glow, check fusible link "B". Fusible link box is located on right inner fender. Check for open in White/Green wiring circuit to ignition switch. See appropriate chassis wiring diagram in WIRING DIAGRAMS.
  3. Turn ignition switch to START position. At ignition switch 7-terminal connector, backprobe Black/Red wire terminal to starter circuit and Black/Blue wire terminal to ignition power circuit. Test light should glow. If test light does not glow at either terminals, replace ignition switch.
scientia non olet · About LEMON Manuals