LEMON Manuals: Even more car manuals for everyone
Home >> Geo >> 1990 >> Storm Base, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Remove alternator belt adjusting bolt. Raise and support vehicle. Remove right side splash shield. Loosen lower alternator retaining bolt.
  2. Remove alternator belt. Disconnect alternator wiring harness connector. Remove alternator mounting bracket-to-engine block retaining bolts. Remove alternator with mount bracket.
  3. To install, reverse removal procedure. Tighten alternator mounting bracket-to-engine block retaining bolts to 24 ft. lbs. (33 N.m). Adjust alternator belt. See BELT TENSION  under ADJUSTMENTS in this article.
scientia non olet · About LEMON Manuals