LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2024 >> GV70 2.5T Advanced >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 4WD Control Diagnosis >> DTC P1958-00: AWD-Torque Error >> DTC Information And Inspection >> Driving Test

Driving Test

  1. Test drive the vehicle and see if the DTC returns.
    • Drive the vehicle over 20 minutes, including going straight section with the speed over 40 km/h.
      • If the DTC returns:

        Replace AWD, and if it works, replace AWD and go to the "Verification of Vehicle Repair" procedure.

        In AWD replacement, conduct "Clutch Learning Reset"

      • If the DTC does NOT return:

        The fault is intermittent caused by poor contact of the control module's connector. Or, the control module's memory was not cleared after repair. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Conduct "wiring inspection" if there is no trouble from the inspection of charging system.