Ground Circuit Inspection
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Ground Circuit (short): Resistance | Approx. below 1Ω |
|
Ground terminal of vibration motor harness connector | Chassis ground |
- Is the result within specification?
YES
- Fault might be intermittent and caused either by poor contact in connectors or wiring harness, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
- Repair as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Repair the fuse, power circuit, or ground circuit with an open. Then, go to "VERIFICATION OF VEHICLE REPAIR ".