Inspect Power/Control Circuit
| Item | Prerequisite Condition | Normal Value | (+) Probe | ↔ | (-) Probe | ||
|---|---|---|---|---|---|---|---|
| Harness Connector | Measure Terminal | Harness Connector | |||||
| Open: Resistance |
|
below 1Ω | Latch | Motor_(+) | ↔ | _"Cinching Motor_(+)" | PTM |
| Motor_(-) | ↔ | _"Cinching Motor_(-)" | |||||
| Short-to-Ground: Resistance | Infinity (∞ | ↔ | Chassis Ground | ||||
| Motor_(+) | ↔ | ||||||
- Is the result within the Normal Value?
YES
- Inspect an intermittent fault of the harness/connector.
NO
- Repair Open/Poor Connection in the abnormal terminal/harness.
- Repair Short between the abnormal terminal/harness and Chassis Ground.