LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2023 >> GV80 3.5T Advanced >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front Upper Arm >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Loosen the wheel nuts slightly.

    Raise the vehicle, and make sure it is securely supported.

  2. Remove the front wheel and tire (A) from front hub.

    Tightening torque: 

    137.3 - 156.9 N.m (14.0 - 16.0 kgf.m, 101.3 - 115.7 lb-ft)

    NOTE:
    • Safely remove the wheel and tire (A) using the guide bolt included in the Tire Mobility Kit (TMK).
      G14722028Courtesy of HYUNDAI MOTOR AMERICA
    • Be careful not to damage the hub bolts when removing the front wheel and tire (A).
    G14722029Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the front strut assembly.

    (Refer to "FRONT STRUT ASSEMBLY ")

  4. Loosen the mounting bolt and then remove the upper arm (A).

    Tightening torque: 

    127.5 - 147.1 N.m (13.0 - 15.0 kgf.m, 94.0 - 108.5 lb-ft)

    NOTE:
    • Do not reuse the mounting bolt.
    G14722030Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals