LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2023 >> GV70 2.5T Advanced >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Tailgate Module >> Power Tailgate Unit >> Removal & Installation >> Removal

Removal & Installation: Removal

CAUTION:
  1. After replacing with a new power tailgate module, check for DTC code at all times.

    If DTC code B24B0 exists, perform power tailgate mode change.

    (Refer to Power Tailgate Module - "TROUBLESHOOTING ")

  2. After replacing with a new power tailgate module, perform the system initialization.

    (Refer to Power Tailgate Module - "TROUBLESHOOTING ")

  3. Before delivery to customer, operate the power tailgate to be sure that there is no warning sound.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear right luggage side trim.

    (Refer to Body - "LUGGAGE SIDE TRIM ")

  3. Remove the power tailgate unit connectors (A).
    G14764745Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the power tailgate unit (A) after loosening mounting nuts.
    G14764746Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals