LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2023 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Automatic Transmission Control System - 3.5L) >> Transmission Oil Temperature Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect the E Module connector.
  3. Measure resistance between sensor signal terminal.
  4. Check that the resistance is within the specification.

    Information 

    • In case of oil temperature sensor failure, the temperature is fixed at 80° C.