LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2023 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Control System - 2.5L) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Remove the ECTS.

    (Refer to "REMOVAL ")

  3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS signal terminals and ground terminals.
  4. Check that the resistance is within the specification.
scientia non olet · About LEMON Manuals