LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2023 >> G70 3.3T Sport Advanced, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Tires/Wheels/Alignment >> Wheel >> Repair Procedures >> Run Out Inspection

Run Out Inspection

  1. Jack up the vehicle.
  2. Measure the wheel run-out by using a dial indicator as shown below.
    Run-out Aluminum
    Radial mm (in.) Below 0.3 (0.0118)
    Lateral mm (in.) Below 0.3 (0.0118)
  3. If measured value exceeds the standard value, replace the wheel.
    G15588642Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals