(Smart Key System - Tailgate Open Switch Removal And Installation)
Abbreviated Procedures
| Work | H/W | Tightening torque N.m (kgf.m/lb-ft) | SST/Equipment | Chemical | etc | |
|---|---|---|---|---|---|---|
|
||||||
| 1 | Disconnect the battery negative (-) terminal | - | - | Diagnostic tool | - | - |
| 2 | Remove the tailgate upper trim | Fastener | - | - | - | - |
| 3 | Remove the tailgate side trim | Fastener | - | - | - | - |
| 4 | Remove the tailgate inner switch | - | - | - | - | - |
| 5 | Disconnect the tailgate inner switch connector | - | - | - | - | - |
| 6 | Remove the tailgate lower trim | Screw/Fastener | - | - | - | - |
| 7 | Remove the rear wiper arm cover | - | - | - | - | - |
| 8 | Remove the wiper arm | Nut | 8.8 - 10.8 (0.9 - 1.1/6.5 - 8.0) | - | - | - |
| 9 | Disconnect the wiper motor connector | - | - | - | - | - |
| 10 | Remove rear wiper motor and linkage assembly | Bolt | 6.9 - 10.8 (0.7 - 1.1/5.1 - 8.0) | - | - | - |
| 11 | Disconnect the tailgate outer switch connector | - | - | - | - | - |
| 12 | Remove the tailgate outer switch mounting nuts | Nut | 3.9 - 5.9 (0.4 - 0.6/2.9 - 4.3) | - | - | - |
| 13 | Remove the tailgate outer switch | - | - | - | - | - |
|
||||||
| Install in the reverse order of removal | ||||||
|
||||||