Description & Operation: Operation
- General Function
- Auto-learn takes place only once per Ignition cycle.
- On successful completion, 4 road wheel sensor ID's are latched into memory for monitoring.
- Until Auto-learn completes, previously learned sensors are monitored for under inflation/leak warnings.
- General Conditions to Learn New Sensors:
- Receiver must determine that it is confident that sensor is not temporary:
- Uses vehicle speed.
- Uses confidence reduction of previously learned sensors.
- Typical time at driving continuously over 15.5 mph (25 kph) to learn a new sensor is up to 20 minutes.
- General Conditions to Un-Learn a sensor that is removed:
- It takes less than 20 minutes at 15.5 mph (20-30 kph).
- Confidence reduction is dependent on time which vehicle is driven at speed greater than or equal to 12.4 mph (20-30 kph).