Buzzer Operation
Buzzer operation is defined in the following chart.
| Operation |
BUZZER |
LAMP |
Remark |
| T/gate start |
2 times |
2 times |
When T/gate is triggered by Remote Contol or T/gate Console Switch |
| T/gate start |
n.a. |
n.a. |
When T/gate is triggered by T/gate Inner Switch or T/gate Outer Handle Switch |
| T/gate stop |
n.a. |
n.a. |
|
| System error |
3 Times |
|
PCU/Tailgate antiplay active, 0ver-/undervoltage condition, Endposition-/position error, spindle error, CAN error, Latch closed when Tailgate open |
| T/gate not closed |
10 times |
10 times |
Latch Lock Switch not present |
| During Calibration run |
Continuous ON-OFF beeping |
n.a. |
Activate buzzer but not C_PT Hazard |
| Max. End Position learned |
n.a. |
2 times |
Buzzer confirms learning finished |
| Max. End Position deleted |
1 time |
n.a. |
Buzzer confirms "position deleted" |
| Car is moving with open T/gate |
10 times |
n.a. |
T/gate open AND Speed >3 km/h |
| Garage Position saved |
2 times |
n.a. |
Buzzer confirms "New Garage Position" |