LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2021 >> GV80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System - 3.5L) >> Engine Control Module (ECM) >> Repair Procedures >> Adjustment >> ETC Module Learning Process

ETC Module Learning Process

WARNING: This page is about a different variant/trim than selected.

After replacing or re-installing the ECM, if you do not perform the ETC module learning procedure, the ETC module learning procedure must be performed since shift shock or failure code may be displayed.

(Refer to Engine Control System - "ADJUSTMENT ")

scientia non olet · About LEMON Manuals