LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2021 >> G90 3.3T Premium, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Brake System) >> Master Cylinder >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2022 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    NOTE:
    • Before installing the pin, apply the grease to the joint pin.
    • Use a new snap pin whenever installing.
  2. After installation, bleed the brake system.

    (Refer to Brake System - "ESP SYSTEM BLEEDING ")

scientia non olet · About LEMON Manuals