Component Inspection
- Replace the O2 sensor.
- Clear the DTC using GDS.
- Warm up the engine to normal operating temperature and let it idle until the radiator fan working.
- Drive the vehicle to steady stage around 72~88 km/h for 120 seconds.
- Stop the vehicle and keep the engine idling, 6. Check if O2 sensor monitoring readiness is complete.
- Does the scan tool show DTC P0159?
YES
- Substitute with a known - good ECM and check for proper operation. If the problem is corrected, replace ECM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Troubleshooting is finished.