Repair Procedures: Installation
CAUTION:
- Do not use already used injector fixing clip again.
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur if the component drops. In this case, use it after inspecting.
CAUTION:
- Apply engine oil to the injector O-ring.
- Do not use already used injector O-ring again.
CAUTION:
- Do not use already used bolt again.
CAUTION:
- When inserting the injector, be careful not to damage the injector tip.
- To install, reverse the removal procedure.
Delivery pipe installation bolt:
18.6 - 23.5 N.m (1.9 - 2.4 kgf.m, 13.7 - 17.4 lb-ft)
High pressure fuel pipe installation nut:
29.4 - 35.3 N.m (3.0 - 3.6 kgf.m, 21.7 - 26.0 lb-ft)