LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2021 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine And Transmission Assembly - 2.5L >> Engine Mounting >> Repair Procedures >> Removal and Installation >> LH Engine Mounting Bracket

LH Engine Mounting Bracket

  1. Remove the front cross member. (Refer to Suspension System - "FRONT CROSS MEMBER ")
  2. Remove the LH engine mounting support bracket (A).

    Tightening torque: 

    49.0 - 58.8 N.m (5.0 - 6.0 kgf.m, 36.2 - 43.4 lb-ft)

    G15546701Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the LH engine mounting assembly (A).

    Tightening torque: 

    53.9 - 68.6 N.m (5.5 - 7.0 kgf.m, 39.8 - 50.6 lb-ft)

    G15546702Courtesy of HYUNDAI MOTOR AMERICA
  4. Installation is reverse order of removal.
scientia non olet · About LEMON Manuals