Repair Procedures: Removal
- Turn the ignition switch OFF and disconnect the battery negative (-) cable.
- Release the residual pressure in fuel line.
(Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")
CAUTION:- When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the diagnostic tool after completion of "Release Residual Pressure in Fuel Line" work.
- Remove the fuel pump.
(Refer to "FUEL PUMP ")
- Press the fixing hook (A) with a driver and then remove fuel sender (B) in the arrow direction.
- Remove the fuel sender after releasing the fixing pin (A).