LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2021 >> G70 2.0T, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Front Driveshaft Assembly >> BJ Boot >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the front driveshaft.

    (Refer to "FRONT DRIVESHAFT ")

  2. Remove the TJ joint assembly.

    (Refer to "TJ JOINT ")

  3. Remove the BJ boot band (A) by using the driver (-).
    G14176413Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the BJ boot.
  5. Install in the reverse order of removal.
    NOTE:
    • The boot band should be replaced with a new one.
    • Do not disassemble the BJ assembly.
scientia non olet · About LEMON Manuals