Wheel Speed Sensor Circuit Check: Notes
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Signal circuit: (Open/Short): Current | High: 11.8-16.8 mA, Low: 5.9 ~ 8.4 mA |
|
Wheel Speed Sensor harness connector's Signal terminal | Chassis ground |
- Is the result within specifications?
YES
- Fault can be intermittent caused by poor connection in wheel speed sensor harness (FL). Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Replace it with a new wheel speed sensor and see if it properly operates. If the problem is cleared, put the new wheel speed sensor in place and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.