Repair Procedures: Replacement

Disconnect the negative (-) battery cable.
Remove the crash pad.
(Refer to Body - "CRASH PAD ")
Remove the connector.
Remove the bracket (B) and receiver (C) by loosening the nut (A).
Tightening Torque:

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.
Reconnect the battery, and then turn on the ignition.
NOTE: Firmly fasten the receiver connector until you hear a click.
Replace the receiver, and then perform the learning process using a diagnostic instrument (GDS).