Repair Procedures: Installation
- Install the wiper motor and linkage assembly and then connect the wiper motor connector.
Tightening Torque:
6.9~10.8 Nm (0.7~1.1 kgf.m, 5.0~7.9 lbf.ft)
- Install the cowl top cover.
- Install the windshield wiper arm and blade.
Tightening Torque:
22.5~26.5 Nm (2.3~2.7 kgf.m, 16.6~19.5 lbf.ft)
NOTE:- The windshield wiper motor must be cycled to make sure that it is in the park position.
If necessary, adjust the wiper arm and blade.
- The windshield wiper motor must be cycled to make sure that it is in the park position.
- Install the wiper arm and blade to the specified position.
- Auto stop position (Blade)