LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2020 >> G80 5.0 Ultimate, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Multi Function Camera Diagnosis >> DTC C160C-87: Local CAN Time-Out >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

  1. Connect GDS to Data Link Connector (DLC).
  2. IG "ON" or ENG "ON"
  3. Check if the GDS displays a fault code.
  4. Using the GDS, check to see if there is any fault in the SMART CRUISE CONTROL (SCC) System.
  5. Is the "Ignition Feed Voltage" parameter displayed correctly?

    YES 

    • Go to next procedure.

    NO 

scientia non olet · About LEMON Manuals