LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Brake System) >> Stop Lamp Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the lower crash pad.

    (Refer to CRASH PAD Body )

  3. Remove the knee airbag.

    (Refer to AIRBAG MODULE Restraint )

  4. Disconnect the stop lamp switch connector (A).
    G11340319Courtesy of
  5. Pull the locking plate (A) as indicated by the arrow.
    G11340320Courtesy of
  6. Turn stop lamp switch 45° counterclockwise and remove it.
    G11340321Courtesy of
  7. Inspect a removed stop lamp switch along the below procedures.
  1. Confirm a normal connection with terminal part
    • - A confirmation can be made to see if the connector has been secured properly and if a connection mark is present.
    G11340322Courtesy of
  2. Perform the inspection of parts resistance
G11340323Courtesy of
Resistance (Ω) 3-4 1-2
Non rod protruded
(switch turned OFF)		 Infinite 0
Rod protruded
(switch turned On)		 0 Infinite
scientia non olet · About LEMON Manuals