LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Brake System) >> Stop Lamp Switch >> Repair Procedures >> Adjustment

Repair Procedures: Adjustment

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the lower crash pad.

    (Refer to CRASH PAD Body )

  3. Remove the knee airbag.

    (Refer to AIRBAG MODULE Restraint )

  4. Confirm the gap between stop lamp switch and bracket.

    Stop lamp clearance:  1.0 ~ 2.0 mm (0.04~ 0.08 in.)

    G11340309Courtesy of
  5. If the gap between stop lamp switch and bracket is less than 1.0~2.0mm (0.04~0.08in), check the mounting clip and other parts around the stop lamp.
  6. If normal, remove the stop lamp switch and then install again.
scientia non olet · About LEMON Manuals