Fork Assembly [With AWD]

Raise the vehicle, and make sure it is securely supported.
Remove the front wheel and tire (A) from the front hub.
Tightening Torque:

107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
NOTE:
- Be careful not to damage the hub bolts when removing the front wheel and tire.

Loosen the nut (A) and then remove the stabilizer link from the front strut assembly.

G12716599

Courtesy of HYUNDAI MOTOR AMERICA

NOTE:

Using a hex wrench, fix the end of stabilizer link when loosening the nut.

G12716600

Courtesy of HYUNDAI MOTOR AMERICA

Loosen the bolt and nut, separate the front shock absorber assembly from the lower arm.
Tightening Torque:

137.3 - 156.9 N.m (14.0 - 16.0 kgf.m, 101.3 - 115.7 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting bolts and then remove the cable bracket (B) from the fork assembly.
Tightening Torque:

A: 8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb-ft)

B: 6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting bolt and then remove the fork assembly from the front strut assembly.
Tightening Torque:

78.5 - 98.1 N.m (8.0 - 10.0 kgf.m, 57.9 - 72.3 lb-ft)

Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.