LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Electronic Stability Control (ESC) System) >> Rear Wheel Speed Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the rear wheel and tire (A) from the rear hub.

    Tightening torque: 

    88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

  3. Remove the wheel speed sensor bracket bolt & wheel speed sensor (A).

    Tightening torque: 

    6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0lb-ft)

    G11340388Courtesy of
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals