Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Put on gloves to prevent hand injuries.

NOTE:

When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components
Take care not to scratch the body surface.

After loosening the mounting clips, remove the front door frame inner cover (A).
Disconnect the outside rear view mirror connector (A).
After loosening the mounting bolts, remove the outside rear view mirror (B).
Tightening torque:

6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)
Install in the reverse order of removal.

Information

Make sure the connector is connected properly.
Replace any damaged clips.