LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Air Conditioning System) >> Evaporator Temperature Sensor >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the cowl side trim.

    (Refer to Body - "COWL SIDE TRIM ")

  3. Remove the glove box upper cover.

    (Refer to Body - "CRASH PAD MAIN LOWER ASSEMBLY ")

  4. Remove the evaporator temperature sensor (A), by pulling it after rotating 90° Counterclockwise.
    G11342874Courtesy of
  5. Disconnect the connector, then remove the ambient temperature sensor.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals