LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Occupant Classification Diagnosis) >> DTC B1764-00: OCS MAT Defect >> Component Inspection >> Notes

Component Inspection: Notes

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition "ON" & Engine "OFF" and Using a scan tool, clear the DTC.
  2. Ignition "OFF".
  3. Disconnect the battery (-) terminal cable from the battery, and wait at least one minutes.
  4. Disconnect Passenger side BodySense sensor Mat connector.
  5. Substitute the Passenger side BodySense sensor Mat and check for proper operation.
  6. Is DTC present problem?

    YES 

    • Substitute a known-good Passenger side BodySense sensor ECU, and check for proper operation.

      If the problem is corrected, replace Passenger side BodySense sensor ECU and then go to "VERIFICATION OF VEHICLE REPAIR " procedure and Go to "BODY SENSOR RESET " procedure.

    NO 

    • Substitute a known-good Passenger side BodySense sensor Mat, and check for proper operation.

      If the problem is corrected, replace Passenger side BodySense sensor Mat and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals