LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Tire Pressure Monitoring System) >> TPMS Sensor >> Repair Procedures >> Inspection >> Test procedures after installing TPMS sensor

Test procedures after installing TPMS sensor

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. The sealing washer should be compressed on the outside rim of the hole.
  2. The lower part of the valve should be located in a specified place (no metal brackets).
  3. The housing should contact at least one or more points of the rim surface.
  4. The rim of the housing mounting height shall not exceed the height of the chin.
G11340016Courtesy of
G11340017Courtesy of
scientia non olet · About LEMON Manuals