SAS Calibration

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.

Connect the GDS to the data link connector located underneath the dash panel.
Make a selection and operate the process according to the instructions on the GDS screen.

Fig 1: Screen Display - SAS Calibration (1 Of 4)

Courtesy of HYUNDAI MOTOR AMERICA

Fig 2: Screen Display - SAS Calibration (2 Of 4)

Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Screen Display - SAS Calibration (3 Of 4)

Courtesy of HYUNDAI MOTOR AMERICA

Fig 4: Screen Display - SAS Calibration (4 Of 4)

Courtesy of HYUNDAI MOTOR AMERICA