LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 228 (4WD Control Diagnosis) >> DTC P3102-00: Control Module - Control ASIC Over-Temperature >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verifying that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)  " mode.
  2. Using GDS, Clear DTC.
  3. Check DTCs in other system after fixing the vehicle.

    (If there is the DTC representing "4WD CAN time out", Clear the DTC.)

  4. Are any DTCs present?

    Yes 

    • Go to the applicable troubleshooting in this procedure.

    No 

    • System is performing to specification at this time.
scientia non olet · About LEMON Manuals