Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the rear console assembly.
(Refer to Body (Interior and Exterior) - "FLOOR CONSOLE ")
Using a screwdriver or remover, remove the rear console upper cover (A).

Fig 1: Locating Rear Console Upper Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the rear console control unit connector (A) and AVN keyboard connector (B).

Fig 2: Locating Rear Console Control Unit Connector And AVN Keyboard Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the rear console control unit (A) after loosening the mounting screw.

Fig 3: Locating Rear Console Control Unit With Mounting Screws
Courtesy of HYUNDAI MOTOR AMERICA
To install, reverse the removal procedure.
Information
- Make sure the connector is connected properly.
- Replace any damaged clips (or pin-type retainers).