Repair Procedures: Inspection
WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
- Check the battery voltage. (Low beam will be on when the battery voltage above 9V.)
- Check the fuse and relay.
- Check the polarity of ballast. (If the polarity are changed, low beam doesn't lighten)
- Check the bulb connector securely.
- Visually bulb checking (no filament): damaged glass, damaged for upper parts and lower parts of glass tube.
- After (1)-(5), replace the ballast and the ignitor. (ballast assembly).